80mm Heavy Duty Mesh Filter. Ideal for Hydrant Fill systems.
Simple and effective way of stopping debris from entering your water truck.
From AUD$191.25
excl. GST
Fittings
Buttweld Fittings
Camlocks
Flange Fittings
Hose Fittings
Pipe Clamp
Roll Grooved
Stainless Steel Fittings
Threaded Fittings
Brass Swing Check Valve
Swing Check valves allow water to pass from one direction. Swing check valves are commonly used at the inlet of fill pipe manifolds and stop water rushing out when the camlock is disconnected. The swing disc allows water to pass freely.
From AUD$135.44
excl. GST
Single Sphere Expansion Joint (Rubber Bellows)
Rubber Bellows are used to pipes and allow for slight movement. Commonly used on flanged water pumps.
From AUD$122.60
excl. GST
Brass Foot Valve
Foot valves are installed at the inlet end of a suction hose. They allow water to flow into the hose but not out. Keeping the hose full of water makes priming pump much faster.
From AUD$82.65
excl. GST
Roll Groove reducing nipple NPT 80mm (3") Groove to 65mm(2.5") NPT Male
Designed to adapt Elkhart Brass Nitro or EXM water cannons to a 3" Rollgrove.
AUD$71.50
excl. GST
NPT Roll Groove to thread adaptors
Need to add a camlock or threaded fitting to a roll groove pipe, You need this!
From AUD$65.00
excl. GST
Roll Groove To Flange Adaptor (Table E)
Roll grove to flange adaptors are a great way to add a flange to your grooved pipework. No welding required! Great for butterfly valves.
From AUD$45.61
excl. GST
Heavy Duty Pipe Clamp, Weld On
Our heavy-duty pipe clamps are ideal for mounting pipes to your water truck. Easy to install, simply weld the base plate to your frame. A great option for mounting front spray bars.
From AUD$39.00
excl. GST
Roll Groove Reducing Coupling 80mm-50mm
One of the best roll grooved fittings in the range, This fitting is a coupling and reducer in one small fitting.
AUD$35.20
excl. GST
Roll Groove Reducing Coupling 100mm-80mm
One of the best roll grooved fittings in the range, This fitting is a coupling and reducer in one small fitting.
AUD$34.10
excl. GST
Roll Groove Reducing Coupling 100mm-50mm
One of the best roll grooved fittings in the range, This fitting is a coupling and reducer in one small fitting.
AUD$32.00
excl. GST
Roll Groove to thread adaptors BSPT
Need to add a camlock or threaded fitting to a roll groove pipe, You need this!
From AUD$30.80
excl. GST
"Grooved Male Camlock Adaptor. 80mm ""3"" Inch"
Ideal for adding a camlock to a grooved pipe or valve.
AUD$30.25
excl. GST
